Clamping Fixtures 2017-07-10T15:49:58+00:00

Flotec Clamping Fixtures

Sensor Clamping always needs to be fast and accurate. FLOTEC offer the following easy to instal clamping rails and fixtures:

Small Rail (RAILMINI-T)

Small Rail (RAILMINI-T) – For the temporary fixing of the small sensors (SENS-MINI-4M-3m) on all pipes in the range of 13 to 100 mm in direct (Z) and V mode.

Made from Stainless steel, anodised aluminium and plastics, this non-corrosive precision rail, with bead chain fastening system is ideal for fast accurate site installations.

Product PDF
Standard Temporary Rail (STD-RAIL-T)

Standard Temporary Rail (STD-RAIL-T) – For the temporary fixing of the standard sensors (SENS-STD-XM-Xm) of all pipes in the range of 50mm to 3 metres in direct (Z) and V mode. This rail is well proven having remained unchanged for many years. The clamping tension is achieved through the use of a simple chain and hook fastening system. Supplied with 2 metres of standard chain. Chain extensions are available for pipe sizes greater than 600mm.

Product PDF
Standard Permanent rail (STD-RAIL-P)

Standard Permanent rail (STD-RAIL-P) – For the permanent fixing of the standard sensors on all pipes in the range of 50mm to 3 metres in direct (Z) and V mode. Supplied with clamping ‘jubilee’ type clips for fastening.

No PDF available
Magnetic fixing block (MAG-BLK-STD)

Magnetic fixing block (MAG-BLK-STD) – For the fixing of standard sensors to ferrous pipes. The stainless steel magnetic fixing blocks uses two 10 kg holding force Neodymium rare earth magnets to securely clamp the standard sensors onto all ferrous pipes in the range from 50mm and up. This is also an ideal mechanism to add a strap over the top for semi-permanent large pipe installations.

Product PDF